Avery 9860 Instruções de Operação descarregar pdf (Página 20)

Subnet Mask

IP networks are divided using subnet masks. The subnet mask address

determines where the IP address belongs in the network.

It consists of four 3-digit numeric fields. 

To change the setting, from the Main Menu: Select Setup, Network.

Then follow these steps.

1. Press  or  until you see

NETWORK

 Subnet Mask 

2. Press Enter/Pause. The current setting is displayed, for example:

Subnet Mask

255.255.000.000

3. Press  or  to move through the positions. Press Feed/Cut to

scroll one digit at a time from 0-9. After you display the option you

need, press Enter/Pause.

For example, to change the subnet mask from 192 to 000, press

 or  to highlight the first position and press Feed/Cut until you

see 0

, then press  to select the next position and press

Feed/Cut until you see 0

, then press  to select the next position

and press Feed/Cut until you see 0

. Press Enter/Pause to save

the setting or press Escape/Clear to exit without saving.

If you enter a series of digits greater than 255 for any segment of

the subnet mask and press Enter/Pause, the printer does not

save the setting and no error appears on the display. Correct the

subnet mask and then press Enter/Pause to save the setting.

4. Press Escape/Clear until you see the Main Menu.

2-4 MonarchNet2 Operating Instructions

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 113 114

Sem comentários

Avery 9860 Instruções de Operação Página 20