Avery 9860 Instruções de Operação descarregar pdf (Página 89)

Configuring the Partner Printer

The partner printer must be configured to 115200 Baud, No parity,

8-bit word length, 1 stop bit, and XON/XOFF flow control.

1. Select Setup, Port Settings, Serial Comm from the partner printer’s

Main Menu. If password protection in enabled, press Feed/Cut three

times, then press Enter/Pause before you see the Setup Menu

options.

2. Select Baud Rate and press  or  to scroll until you see 115200.

Press Enter/Pause.

3. Press  or  to select Word Length. Scroll until you see 8.

Press Enter/Pause.

4. Press  or  to select Stop Bits. Scroll until you see 1.

Press Enter/Pause.

5. Press  or  to select Parity. Scroll until you see None.

Press Enter/Pause.

6. Press  or  to select Flow Control. Scroll until you see

XON-XOFF. Press Enter/Pause.

Using the Smart Relay Telnet Commands

See the following list of commands to configure the printers.

SET PRN RELay PORt [None/S2]

Sets the Smart Relay Partner Identification (port) number to None (no partner

printer) or S2 (partner printer connected to serial port 2). The default is None.

Using the Smart Relay System 5-5

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 113 114

Sem comentários

Avery 9860 Instruções de Operação Página 89